Hydropel WB - clear water repellant

Hydropel is a clear water based silane / siloxane compound formulated to impart excellent water repellency to a wide variety of mineral building materials.  The product is designed to penetrate the first few millimetres of the surface rendering the substrate water repellent dramatically reducing the absorption of  water and water born salts whilst still allowing free passage of water vapour.

APPLICATION INSTRUCTIONS:

Surface to be treated should be dry, firm and free from grime, oil and friable laitance.  Surface should  be cleaned with water or water and detergent and allowed to dry.  It is essential that the surface be free of oily products such as form oil. (Use Chemgo special biodegradable cleaner).

Do not apply if rain is expected or if conditions are damp and cold (below 10'c) or if excessively hot and windy.

Do not splash or spray product on any surfaces not to be treated. If splashes do occur the product can be washed off with water before drying.  If the product has dried it can only be removed mechanically.

Shake drum of Hydropel thoroughly before use.

Walls

Ready to use solution is applied to the surface by saturation flooding using a hand pressure spray applicator or airless spray equipment set to "wet spray" conditions.

Paths and Balconies

Apply as above by spray, broom or brush.  Do not leave ponding after 30 minutes.

COVERAGE:

The consumption for one "wet-on-wet application" should be in the order of 0.5 to 1 litre per square metre.

CURE TIME:

The initial water repellence will develop in about 4 hours.  Product will fully cure in 7 - 10 days.

SAFETY PRECAUTIONS:

Avoid contact with skin and eyes. If contact does occur wash off skin and/or flush eyes immediately with copious amounts of water and seek medical advice.

Use appropriate clothing including protective gloves and goggles while using product.  Keep Out Of Reach Of Children.

STORAGE AND PACKAGING:

Hydropel is not classed as dangerous goods for storage and transport purposes.  Hydropel can be stored in scaled plastic containers for 6 months.  Protect from freezing and prolonged exposure to temperatures in excess of 35'c.  The product should not be used after the use-by date printed on the label.

Hydropel is available in 5 and 20 litre containers.

CLEAN UP:

All tools and equipment can be cleaned with water.